In our previous tutorial, we successfully configured the vent system for the main bathrooms. Now we'll tackle the next critical phase: installing the vertical piping that will complete our ventilation network.

Before proceeding, ensure you save your file—maintaining regular save intervals is fundamental to professional workflow management. Our vertical runs will be strategically positioned in the corner of the lower shaft, with the upper shaft directing flow into the designated outlet point. This configuration optimizes both structural integrity and code compliance.

Let's begin by accessing our working section. To maintain visual clarity and reduce system load, I recommend clearing your workspace of unnecessary elements.

Use the close button to eliminate all inactive views from your display. Close the 3D view as well—we'll focus exclusively on the level two ceiling plan for this phase of the installation. This streamlined approach prevents confusion and allows for more precise work.

Navigate to your section view and select WT (window tile) for optimal visibility. At this stage, we need to determine the roof penetration point, as our vent system must extend completely through the roof structure. While this may require coordination with the project architect—who might request adjustments or modifications to the design—we'll proceed with a direct vertical penetration for now.

Industry best practices dictate maintaining open communication with architectural teams throughout this process, as structural modifications often impact multiple building systems.

Right-click and select "drop pipe" on the lower connection point. Extend the pipe vertically until it penetrates completely through the roof structure. This direct approach ensures maximum efficiency while meeting ventilation requirements.

Here's a critical code compliance point: ensure your vent termination maintains proper clearance from any air intakes. Current building codes typically require a 10-foot radius separation between exhaust vents and intake systems. This regulation prevents contamination and ensures proper building ventilation performance—a requirement that has become increasingly stringent in recent years.

Now that we have our pipe extending through the roof, verify it's configured as a three-inch vent line. Use the align tool to ensure perfect positioning: select the centerline of your vertical run, then the centerline of your horizontal connection. This precision alignment is essential for both performance and professional appearance.

Bring these elements together using the alignment function. The system may require slight adjustments to achieve perfect positioning, but persistence here pays dividends in system performance. Once aligned, your vent system is complete and properly venting to atmosphere—a critical milestone in any plumbing installation.

Now we'll replicate this process for the remaining connections. Access your working section and navigate to the next connection point. The methodology remains consistent: right-click, drop pipe, and extend vertically through the roof structure.

Increase this connection to three-inch diameter as well. However, pay special attention to second-floor alignment—precision at this stage prevents costly corrections later. Use the align command (AL) to select the centerline of your vertical pipe, then align it with the centerline of your horizontal connection. This ensures proper flow dynamics and code compliance.

Switch to your section view to verify the connections are properly seated. If adjustments are needed, make them now. For installations requiring closer wall proximity, adjust positioning in plan view—this modification will automatically update both views, demonstrating the power of integrated building information modeling.

With these connections complete, we can fine-tune the installation details. Consider specifying exact heights above the roof line for optimal performance and aesthetic appeal.

For example, you might specify one foot six inches above the highest roof point, or simply one foot for a more conservative approach. Adjust pipe height accordingly, ensuring consistency across all penetrations. While dimensioning curved surfaces presents challenges, you can establish clear measurements to flat surfaces, maintaining professional documentation standards throughout the project.

This attention to detail in documentation becomes increasingly important as projects move through approval processes and construction phases.

The final phase of our vent system installation focuses on the classroom areas. This presents unique challenges requiring a different approach from our bathroom installations. We'll work systematically, completing one bank at a time to ensure thoroughness and accuracy.

Position your working section to encompass the entire scope of work. In plan view, adjust both the section location and cut depth to capture all relevant sink connections. This comprehensive view prevents oversight and ensures complete system integration.

Classroom vent systems require careful coordination of multiple components. We need to establish vent connections that travel horizontally within wall cavities before transitioning to vertical runs that ultimately penetrate the roof. While we could interconnect these systems—creating shared vent runs for multiple classrooms—we'll implement individual roof penetrations for this installation. This approach provides maximum flexibility and simplified maintenance access.

Before proceeding with new vent installation, we must remove existing vertical extensions above our connection fittings. In your 3D view, identify all extended portions that exceed the required connection points—these will be replaced with properly configured vent lines.

The removal process is systematic: locate each plumbing stack, identify the riser, note the sink connection, and trace the piping up to the connection fitting. Delete everything above this point, as it will be replaced with dedicated vent piping. This approach is necessary because existing sanitary piping cannot be converted to vent classification once installed—deletion and recreation provides the cleanest solution.

Continue this process for all connections on both sides of your installation area. Work methodically to avoid missing connections, and remove any orphaned fittings that may be floating in your model space. These cleanup steps are essential for maintaining model integrity and preventing conflicts during construction documentation.

With our preparation complete, we're ready to begin the specialized vent installation for the classroom areas. We'll pause here and continue with the detailed vent creation process in our next segment, where we'll explore the specific techniques required for these more complex installations.